Access BIOS setting to configure IP address
You must be physically present at LiveCapture to initially set the iDRAC IP address. Once set, you can use iDRAC to view or change the setting.
To initially set the iDRAC IP address:
1. Locate the iDRAC port on the front or back of LiveCapture, and connect an Ethernet cable from your network to the iDRAC port.
2. Reboot or restart LiveCapture.
3. Press the [F2] key multiple times during system boot to enter the BIOS settings.
4. Select iDRAC Settings from the Advanced menu.
5. Select Network from the iDRAC submenu.
6. iDRAC is set to 192.168.1.21 by default. You can change the static address as well. You will need this IP address in order to remotely access LiveCapture.
7. Press [Esc] to back out of each menu, then press to confirm exit.